Setacolor Leather, a complete range for CUSTOMISING and REPAIRING leather & imitation leather. High quality acrylic paint offering a broad palette of colours (23 matt/satin colours and 12 effect colours).
UNIQUE Leather Markers, innovative on the market Markers with an extra-fine tip in 10 colours
Perfect adhesion to and coverage on the support, ultra-fine lines, perfectly uniform flat areas Shades identical to those seen on the bottle Adapted auxiliary products so you can:
PREPARE - CREATE - PROTECT your creations without altering them
Leather Primer & Deglazer - Auxiliary to prepare and degrease the surface, so as to remove the protective varnish that covers it and to degrease it for optimal adhesion of the colours. To be used before applying bottled or marker colours. Soak an absorbent paper towel or cloth with the degreasing agent and rub the surface to be prepared.
Setacolor Leather colours - After preparing the surface, they should be applied in thin, even layers for an even finish. The paint does not leave any traces. The colours are opaque in a maximum of 3 thin layers. Each coat must be left to dry for at least 15 minutes to avoid re-diluting the lower coat ( you can speed up drying with a hair dryer). They can be worked with a brush or airbrush using the range's lightening-thinning auxiliary. The colours can be mixed together and allow for a broader palette and gradations. Depending on the type of leather or imitation leather, the colors can have a more or less matte-satin finish.
Protect your Creation withMatt-satin and gloss varnishes - For optimal and long-lasting results, protective varnishes must be applied to the work. Available in 2 finishes: matt/satin or gloss. The varnish will help to seal the colour perfectly, protecting your creation from rubbing, scratches, wear and tear, and water. They can be applied with a brush, preferably wide and flat for a fully uniform finish, or with an airbrush without prior dilution for a shiny varnish, and mixed 50:50 water and varnish for a matte-satin effect. The matt-satin varnish must be well mixed before use. It is recommended to wait 24 hours before varnishing. Tip: you can achieve the desired finish by mixing matt-satin and gloss varnishes. For a satin finish, mix 3 parts gloss varnish to 1 part matt-satin varnish.