This kit is ideal for beginning your creative activities with epoxy resin. This professional range of bio-based resins is an inexhaustible source of creation. This 40% biosourced resin is safer and more environmentally friendly than other glazing resins.
For use on flat surfaces, such as cards, photos, postcards, canvas and more. Pebeo Bio Glazing Resin creates a glossy, transparent, bubble-free and enamel-look finish on top of your work, adding texture and slight magnifying effect. This makes it ideal for card-making, badge-making, boxes, souvenirs and scrapbooking. Perfect for Mixed Media art. Easy to use, and creates perfectly rounded edges. Quick setting and hard once dried.
The semi-liquid texture of the Glazing Resin is ideal to give relief to flat surfaces but will also allow you to draw by working with pipettes.
Kit contains: 2 part resin system (1 x 30ml Resin and 1 x 15ml Hardener), protective gloves, a wooden stirrer and a guide for use.
Instructions:
Make sure your work surface is horizontal and have a stopwatch.
In a dry and clean container, pour first 1 part of Glaze B hardener and then 2 parts of Glaze A resin. Start the stopwatch.
Mix the two components well until they reach the corners of the container (incomplete mixing does not guarantee hardening, mixing too vigorously will cause bubbles to appear). Transfer the mixture to a second container and mix again to ensure the homogeneity of the resin and optimal mixing. Mixing operations can take up to 5 minutes depending on the quantity prepared.
Total mixing and waiting time before pouring should not exceed 10 minutes. Pour the entire prepared mixture onto the substrate of your choice.
Allow to dry for 6 hours in a dust-free environment. Setting time is gradual and variable depending on the ambient temperature.
Gedeo tips:
Protect your work surface with a plastic sheet.
The mixture is homogeneous when it becomes transparent.
To know the quantity of Glaze Resin to cover a 1 mm thick surface:
Estimate the surface to cover in cm².
Divide the value obtained by 10 which will give a thickness of 1 mm of cast resin
The result determines the quantity of resin to prepare in ml
To cover a surface of 2 mm thickness, multiply the first result by 2 (or divide the surface obtained).
If necessary, help the product to go on the edges with a spatula.
We advise you to protect your work with the application of a coat of Bindex gloss 24 hours before pouring the Biosourced Glazing Resin.
